2
Introduction
1
The LED Lighting Driver with LED light strips allows you to remotely control
your lighting or even apply schedules for automatic switching from your
mobile phone.
This guide will provide you with an overview of the product and help you
get through the initial setup to installation.
LED Strip Controller
Input : 12Vdc/24Vdc
Output : 12Vdc/24Vdc Max 6A
+
I
DC In
DC Out
+
4
3
2
1
1
2
3
4 NC
NC
NC
SC
-
CT
C-
W-
RGB
B-
B-
W-
G-
G-
R-
R-
RGBW
NC
NC
NC
Get started
2
Warning!
• The LED Lighting Driver must be installed and serviced only by qualified
electrical personnel.
• Do not touch the terminals of the device during testing.
• Turn off all power supplying this equipment before installing.
• Make sure that the power supply is off before connecting or disconnecting
it to the auxiliary device.
• Always use a properly rated voltage sensing device to confirm power is off.
• Replace all devices, doors and covers before turning on power to this
equipment.
Failure to follow these instructions will result in death or serious injury.