ZiFiSense Zeta IRZ1ZT92, Руководство по установке

Страница: 12 / 14

IRZ1ZT92
12
7. Use of Device
The sensor detection distance is about about 3 meters without occlusion.
The detection is based on the amount of change in infrared detection to
determine whether there is the motion, so it is unable to detect a
stationary person.
7.1. Power on
Place the device within the coverage of the ZETA network, install the
battery, and wait for the device to go online. After the device is online, the
current device status is reported. You can set the threshold for motion
detected and the threshold for no motion detected according to the usage
scenario.
7.2. Support function

Status report: Reports motion/no motion detected status.

Set threshold for motion detected: within the detection time range, the
sensor reaches the required number of triggers is determined as
motion detected. (Default setting for motion detected is: triggered 2
times in 5 seconds.)

Set threshold for no motion detected: When the current status is
Motion Detected, and if the number of triggers is 0 within the detection
time range, it will be determined as No Motion. (Default setting for no
motion detected is, triggered 0 times in 20 seconds.)

Query device status:Query the current threshold status for motion
detected/no motion set by the device.
8. Common faults and handling

Ensure ZETA signal coverage

Ensure that the device is powered on, and the ZETA network device
management platform can observe that the ZETA module is on line

Check the battery usage of the device. When the battery is low, replace
the battery in time.