ZIEHL TR600, Руководство по эксплуатации, Страница: 5 / 16

( date / name ): 25.03.08 shu/Fz Z. Nr.: 1120 0753.6
Page 5 of 16 Type: TR 600 RS485
ZIEHL industrie-elektronik GmbH + Co KG, Daimlerstr.13, D-74523 Schwäbisch Hall, Tel.: +49 791 504-0, Fax: -56, e-mail: info@ziehl.de
Important notes
ATTENTION
Dangerous electrical voltage!
May lead to electrical shock and burn.
Before beginning of work switch unit and equipment free of
voltage.
To use the equipment flawless and safe, transport and store properly, install and start
professionally and operate as directed.
Only let persons work with the equipment who are familiar with installation, start and use
and who have appropriate qualification corresponding to their function. They must
observe the contents of the instructions manual, the information which are written on the
equipment and the relevant security instructions for the setting up and the use of
electrical units.
The equipments are built according to DIN / EN and checked and leave the plant
according to security in perfect condition. f, in any case the information in the
instructions manual is not sufficient, please contact our company or the responsible
representative.
Instead of the industrial norms and regulations written in this instructions manual valid
for Europe, you must observe out of their geographical scope the valid and relevant
regulations of the corresponding country.
Observe the maximum temperature permissible when installing in switching
cabinet. Make sure sufficient space to other equipment or heat sources. If the
cooling becomes more difficult e.g. through close proximity of apparatus with
elevated surface temperature or hindrance of the cooling air, the tolerable
environmental temperature is diminishing.
ATTENTION!
Connect temperature sensors Pt 100
Temperature sensors must be connected to the plug-in terminals T11, T12, T13 etc.
To ensure proper operation this plug-in terminals have gold-plated contacts. Do not use
these plugs for other terminals.
Universal power supply
The universal power supply works within the ranges AC/DC 24-60 V or AC/DC 90-240 V.
Before switching on make sure, that the operational voltage Us of the type- plate and the
mains voltage are the same.