7 Dismounting the brake
During the mounting as well as the dismounting also the operating manual of the brake has to be
observed.
Risk of death!
When dismounting the brake make sure that the cabin and the counterweight are
mechanically secured against movement!
Caution!
"
"
Due the electrostatic discharge the absolute encoder can be destroyed! Do not touch the pins of the encoder
cable as well as the electronics of the absolute encoder!
"
"
You must discharge your own body before touching. This can be done, for example, by touching a conductive,
earthed object (for example bare metal switch cabinet parts) immediately before.
Figure 7-01
Figure 7-02
1. Remove cover from connection box (1).
2. Disconnect the electrical connection (2) of both brake bodies.
3. Carefully remove strain reliefs (3) of all connecting cables with wire cutters.
4. Cut off varistors (4).
Figure 7-03
Figure 7-04
5. Feed all connecting cables (5) out of the terminal box.
6. Remove the cable ties at the brake cables.
7. Unscrew the hexagon head bolt M10 x 20 - 8.8 (7) with screw wrench size 17 and remove the
eye plate (6).
8. Unscrew both hexagon head bolts M6 x 12 - 8.8 (9) with screw wrench size 10 and carefully fold
back the adapter plate (8).
Assembly instructions
–
model series ZAtop
Dismounting the brake
A-TIA19_13-GB 2027 Index 002
Part.-No. 01013468-GB
8/16
