3 Product overview
3.1
Operational area
The ZAtop, a permanent magnet inner-rotor synchronous motor, offers all bene
fi
ts which a modern
elevator motor asks for:
•
simple installation
•
best controllability
•
lowest noise level
•
highest travel comfort
•
compact design
Due to the very compact design the ZAtop is ideal for machine roomless elevators. Of course the
certi
fi
ed brakes provide maximum security and are approved as a safety device for ascending car
overspeed protection. Protected through registered design and patents application pending one can
for the very
fi
rst time build a new dimension of machine roomless elevators.
3.2
Transport
"
ZIEHL-ABEGG SE electric motors are packed by the manufacturer for the types of transport and
storage agreed upon.
"
Transport the motor(s) either with the original packing or at the casted eyelets or eyebolts using
adequate hoists.
"
Transport motor without any additional load and taking the centre of gravity into account!
"
The threads in the shaft ends are not to suit eyebolts to transport the motor.
"
Avoid excessive vibration and shocks.
"
Check packing and motor for possible damage and report the forwarding agency about any
damages caused by transport. Shipping damages are not covered by our guarantee!
3.3
Storage
"
Store the motor in the original packaging in a dry area protected from the weather or protect it from
dirt and weather until
fi
nal mounting.
"
Extreme heat or cold (storage temperature -20
°
C to +60
°
C) must be avoided!
"
High humidity which can lead to condensation must be avoided.
"
Avoid aggressive conditions (for example salt spray)!
"
Avoid excessive storage times (we recommend max. one year) and check motor bearing for correct
function before installing the motor. (Ease the brakes and move the rotor by hand. Take care if the
bearing makes untypical noises)
3.4
Disposal / recycling
Disposal must be carried out professionally and environmentally friendly in accordance with the legal
stipulations.
4 Mechanical installation
4.1
General mounting advises
"
Mounting, electrical connection and commissioning are only to be performed by trained service
personnel. Adhere to all machinery-related requirements and speci
fi
cations supplied by the system
manufacturer or machine builder.
CAUTION!
Caution!
"
When working at or in the lift, the drive and especially the brakes have to be covered and protected
against dust and chips.
Any violation will result in a loss of guarantee on the motors and accessories!
The following general rules apply:
"
The rope pull may be vertical or horizontal.
"
At lateral (horizontal) rope pull, the motor housing must be supported on the side. The
fi
xings scews of the motor must not be loaded with shearing force!
"
If the traction sheave should offer more grooves than the actual number of ropes, the ropes must
be applied on the sheave either centred or towards the motor side.
Product overview
$7%$B*%
Part.-No. 01008166-GB (
EU-BD 845
)
6/68
2ULJLQDORSHUDWLQJLQVWUXFWLRQV
ZAtop
–
model series SM160.30B/40B
