4.2 ECblue motor size O(072)500 W, B(090)
Procedure for inserting the adapter
•
Remove the terminal compartment cover.
•
If an AM-STICK-WB is inserted, remove it.
•
Insert the adapter in the correct position.
Procedure for connecting the adapter
1. Plug the USB cable into the adapter and connect to the computer.
2. If necessary, secure the cable ties at the recess in the housing using cable ties.
3. To update the I/O printed circuit board, connect the additional connection cable
article no. 00166180 to the adapter and attach it to the 10V and GND pins in the
correct position on the ECblue plug connection.
After completing the update or programming, remove the cables and disconnect the
adapter. Re-insert the AM-STICK-WB if installed.
Operating Instructions
IF-ECblue
Inserting and connecting the service adapter
L-BAL-E327-GB 2023/19 Index 001
Part.-No.
9/11
