Link Quality / Signal Strength
The Link Quality and Signal Strength bar graph is only active when the node
is in Infrastructure Mode. The bar graph displays the quality and strength of
the link between the node and its Access Point. A label summarizes the
quality of the Link over the bar graph, which can take on one of the following
values:
“Not Applicable”
“Poor”
“Fair”
“Good”
“Excellent”
The driver will start looking for a better Access Point if the Link Quality
becomes “Poor”. Link Quality is a measurement of receiving and transmitting
errors over the radio.
Configuration Tab
The Configuration Tab contains several fields where operating parameters of
the driver can be viewed or changed. Changes to any of the parameters in
this panel can be applied to the driver without a need to restart the computer.
Profile Name
Each Profile represents specific settings of the USB Dongle. You can set the
settings for each profile. Next time when you want to change the USB Dongle
settings, you can just select the profile you want to use.
39
Содержание VCTnet AirXpress UC11B
Страница 37: ...Dynamic setting example 37 ...
Страница 43: ...43 ...
