Page
24
BIOS Features Setup
Virus Warning
You can "Enable" or "Disable" this feature. When enabled, it will activate automatically if anything attempt to
access the boot sector or hard disk partition table during system boot-up. The default value is "Disabled".
CPU Internal Cache
This category enables or disables the internal cache to speed up memory access. The default value is
"Enabled".
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power on the computer. If it is set to "Enabled",
BIOS will shorten or skip some check items during POST. The default value is "Disabled".
Boot Sequence
This category determines which drive computer searches first for the disk operating system (i.e., DOS). The
default setting is "A,C,SCSI", means that the system will determine the drive A before drive C.
Swap Floppy Drive
This feature allows you to enable the system swap floppy function, the default is "Disabled". When this
function enables, the system will assign the Drive A as Drive B, and vice versa.
Boot Up Floppy Seek
The default setting is "Enabled", so that the BIOS will search for floppy disk drive to determine if it is 40 or 80
tracks. If disabled, BIOS will not search for the type of floppy disk drive by track number. Note that there will
be no warning message if the drive installed is 360K.
