6
Frequency Measurements
1) Set the Function switch to the Hz position.
2) Fully enclose the conductor to be measured. Do not
allow a gap between the two halves of the jaw.
3) Read the Frequency value on the LCD.
Flashlight
Press and hold the top button to turn the flashlight on.
Release the button to turn the flashlight off.
Data Hold
To freeze the current reading on the LCD, press the “Hold
Backlight” key. The word HOLD will appear on the LCD while
the meter is in the Data Hold mode. To release the Data Hold
function and return the meter to normal operation, press the
“Hold Backlight” key again. The word HOLD will switch off.
Backlight display
Press and hold the “Hold Backlight” key for more than 2
seconds to turn on the backlight. This will also activate the
Data Hold function. To release the Data Hold function and
return the meter to normal operation, press the Data Hold
key momentarily. To turn off the backlight, press and hold the
“Hold Backlight” key for more than 2 seconds
AUTO POWER OFF