5
Non-Contact AC Voltage Measurements
1)
Touch the probe tip to the hot conductor or insert into
the hot side of the electrical outlet.
2)
If AC voltage is present, the detector light will
illuminate.
NOTE
: The conductors in electrical cord sets are often
twisted. For best results, rub the probe tip along a
length of the cord to assure placing the tip in close
proximity to the live conductor.
NOTE
: The detector is designed with high sensitivity.
Static electricity or other sources of energy may
randomly trip the sensor. This is normal operation
Flashlight
Press and hold the top button to turn the flashlight on.
Release the button to turn the flashlight off.
Data Hold
To freeze the current reading on the LCD, press the “Hold
Backlight” key. The word HOLD will appear on the LCD
while the meter is in the Data Hold mode. To release the
Data Hold function and return the meter to normal operation,
press the “Hold Backlight” key again. The word HOLD will
switch off.
WARNING:
Risk of Electrocution. Before use, always
test the Voltage Detector on a known live
circuit to verify proper operation
