background image

-  - 

damaged. Inadequate extension cords can be dangerous. Do not abuse extension cord and do not 
yank on any cord to disconnect. Keep cord away from heat and sharp edges. Always disconnect 
the extension cord from the receptacle before disconnecting the machine from the extension cord. 

 
WARNING:

 

To reduce the risk of electrocution, don’t start and run the machine in the rain or 

storm.  Keep  all  connections  dry  and  off  the  ground.  Do  not  touch  plug  with  wet  hands.  It  is 
strictly prohibited to let water leak into the machine. 

WARNING:

 

When the machine is turned on, the interior pumps start and continue to run even if 

the pressure wand trigger has not been depressed. Running the machine for more than 3 minutes 
without depressing the pressure wand trigger could cause heat damage to the motor and pumps, 
Please do not leave the machine running unattended or unused for more than 3 minutes. 

 

WARNING:

 

When the machine is running, please maintain a constant water supply. Without 

water circulation will damage the sealing rings of the machine. 

WARNING:

 

It is necessary to turn on the spray lance within one or two minutes after the 

machine has been started. Otherwise, the temperature of the circulating water within the machine 
will soon rise to a critical point, which will cause damage to the sealing rings inside the machine. 

WARNING:

 

Don’t start and run the machine in a place excessively cold so as to prevent the 

machine from the freezing current. 
 

WARNING:

 

This machine has been designed for only using cleaning water, do not use corrosive 

chemicals.  
 

WARNING: 

Use cleaning agent supplied or recommend by the manufacturer. 

WARNING: 

Do  not  use  the  machine  within  the  range  of  persons  unless  they  wear  protective 

clothing. 

WARNING:

 

High-pressure  jets  can  be  dangerous  if  subject  to  misuse.  The  jet  must  not  be 

directed at persons,  live  electrical  equipment  or the  machine  itself.  Pressure  washers should not 
be pointed at tire walls, as it may be possible to damage them. 

WARNING: 

Do not direct the jet against yourself or others in order to clean clothes or footwear. 

WARNING:

 

Disconnect from the electrical power supply before carrying out user maintenance. 

If  the  mains  cable  is  damaged  it  must  be  replaced  by  the  manufacturer,  or  its  service  agent  or 
similarly qualified person to avoid a hazard. 
 

WARNING:

 

To ensure the machine safety, please only use original spare parts from the 

manufacturer or approved by the manufacturer. Do not use the machine before you changed them 
if they are damaged. 

WARNING:

  High  pressure  hoses,  fittings  and  couplings  are  important  for  the  safety  of  the 

machine. Use only hoses, fittings and couplings recommended by the manufacturer 

WARNING:

 

Do not use the machine if a supply cord or important parts are damaged, e.g. safety 

devices, high pressure hoses, trigger gun. 

WARNING:

 

Be aware of the recoil caused by the water jet when the machine is switched on. 

WARNING:

 

 When the machine is moving and installing, the machine must be in flat.

 

When 

moving the machine, pulling the handle to move it. 

WARNING:

   

Connect  to  the  water  supply.  The  machines  are  not  suitable  for  connection  to 

portable water mains. Connect the machine to the water supply. (It can be a water container). 
Make sure the inlet water pressure keeps between 0.01MPa and 0.4MPa.The inlet pipe should at 

Содержание ZI-5990













Отзывы: