Zico QUIC-LIFT HLAS Series, Запчасти и инструкция по эксплуатации

Страница: 11 / 32

-11-
WIRING SYSTEM:
1. Lights are to be mounted on forward and rear face of
ladder rack.
2. Two six-foot lengths of wire (95) are provided and
installed, one for each light. Wires run on the inside
of the rack.
3. one six-foot length of wire (95) provided to run
from the switch (89) to the light wires (95). This
wire should run-up through the right boom.
4. Snap plug connections (96) will be attached to each
wire, ready to plug into lights prior to mounting.
FIGURE 7
WIRING SYSTEM
FLASHING LIGHT KIT