background image

4

71

Fig. 6

1.  When connecting extension drain hose, insulate the connecting part of extension drain hose with a

shield pipe, do not let the drain hose slack.

Fig. 7

Connective pipe

2.  For the left-hand and right-hand piping, remove the pipe cover from the side panel. The pipe cover

must be kept as it may be used when relocate the air conditioner to any other place.

Fig. 8

4. Indoor unit installation 

For SC 30xx models

1.

Pass the piping through the hole in the wall.

2. 

Put the upper claw at the back of the indoor unit on the upper hook of the installation plate, move the

indoor unit from side to side to see that it is securely hooked.

3. 

The female half can be easily past through by lifting the indoor unit with a cushioning material bet-

ween the indoor unit and the wall. Get it out after finishing it.

4.  Push the lower part of the indoor unit up on the wall. Then move the indoor unit from side to side, up

and down to check if it is hooked securely.

G

ATTENTION

Always use the highest care when bending the piping. Make sure that the piping always is

bended and not nodded. In case of a nodded pipe: do not attempt to install this nodded pipe as

this is a potential refrigerant leak.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

. .

.

.

. .

.

.. .

.

.

.

.

.

.

. .

.

. .

.

.

.

.

.

.

.

.. .

.

.

. .

.

.

.

.

.

. .

.

. . .

.

.

.

.

.

.

. .

.

.

.

.

.

.

. .

.

.

.. .

.

.

.

.

. .

.

.

.

.

.

. .

.

.

.

.

. .

.

..

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

. ..

.

.

.

.

.

.

.

......

..

.

.

.

.. .

43

Pipe holder

Pipe Cover (left)

Left piping

Left back piping

Right back piping

Right piping

Pipe Cover (right)

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

. .

.

.

. .

.

.. .

.

.

.

.

.

.

. .

.

. .

.

.

.

.

.

.

.

.. .

.

.

. .

.

.

.

.

.

. .

.

. . .

.

.

.

.

.

.

. .

.

.

.

.

.

.

. .

.

.

.. .

.

.

.

.

. .

.

.

.

.

.

. .

.

.

.

.

. .

.

..

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

. ..

.

.

.

.

.

.

.

......

..

.

.

.

.. .

43

Upper Hook

Lower Hook

Cushion

material

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

. .

.

.

. .

.

.. .

.

.

.

.

.

.

. .

.

. .

.

.

.

.

.

.

.

.. .

.

.

. .

.

.

.

.

.

. .

.

. . .

.

.

.

.

.

.

. .

.

.

.

.

.

.

. .

.

.

.. .

.

.

.

.

. .

.

.

.

.

.

. .

.

.

.

.

. .

.

..

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

. ..

.

.

.

.

.

.

.

......

..

.

.

.

.. .

43

Do not block water flow by a rise.

Do not put the end of drain hose 

into water.

instal_S(C)30xx.qxd  19-07-2010  13:33  Pagina 71

Содержание SC 3050























Отзывы: