MANUAL
A
INSTALLING THE HEATER
Carefully remove your Zibro heater from the box and check the contents.
In addition to the heater you also need to have:
E
a manual fuel pump
E
a transportation cap
E
these directions for use
Keep the box and the packaging materials (Fig. A) for storage and/or transportation.
Remove the other packaging materials:
E
Remove the packaging material from the grill
G
. Lift the grill from the slot
(Fig. B) and pull it forward.
E
Push the packing material on top of the combustion chamber
D
slightly
down and remove it (Fig. C). Remove the packaging materials from under
the combustion chamber as well (Fig. D).
E
Put the combustion chamber back into its place. The combustion chamber
is positioned correctly when it can be smoothly moved a little to the left
and to the right by its handle
E
(Fig. E). Close the grill: Slightly lift it to
reposition it in its slot.
E
Open the lid for removable tank
H
and remove the piece of cardboard.
Fill the removable tank as indicated in Section B.
Insert the batteries into their holder
L
at the back of the heater (Fig. F).
Ensure that the positive and negative poles match the + and - marks indicated
on the battery housing.
The floor should be firm and completely level.
Your heater is now ready for use.
B
FILLING FUEL
Do not fill the removable tank in the living room, but in a more suitable place
(there can always be some spillage). Follow the procedure below:
Make sure that the heater is switched off.
Open the lid
H
and lift the removable tank
I
out of the heater (Fig. G).
Note: Some drops may leak from the tank. Put down the removable tank
(cap pointing upwards) and screw off the fuel cap.
2
1
6
5
4
3
2
1
4
65
E
E
E
E
E
E
B
C
D
E
G
F
