Zibro Laser Скачать руководство пользователя страница 27

Страница: 27 / 34

The available temperature settings range from 6°C minimum to 28°C maximum.

When the heater has been unplugged (or after a power failure), the temperature

will reset to the factory setting of 20°C.

USING THE TIMER

The timer allows you to switch on the heater automatically at a preset time.

In order to switch on the timer, the correct time must have been set (refer to

Section C) and the heater should be off.

Follow the procedure below:

Press the ON/OFF button

and then the TIMER key

immediately after that.

The TIMER light and the information display

will start blinking.

Use the adjustment keys

to set the time at which the heater must ignite.

Use the key on the left (

HOUR) to set the hours and the key on the right

(

MIN) to set the minutes (interval of 5 minutes).

After approximately 10 seconds the information display will show CLOCK

again and the TIMER indicator light will light up, indicating that the timer

function has been activated (Fig. H).

The timer will ensure that the room will have been heated to approximately

the required temperature at the set time.

When you want to switch off the heater and ignite it again with the timer, all

you have to do is press the TIMER key (refer to Section G).

Press the ON/OFF button

once to clear the timer setting.

SWITCHING OFF THE HEATER

There are two ways to switch off the heater.

Press the ON/OFF button

. The information display will show the CLOCK

signal. Within approximately one minute the flame will have extinguished.

Press the TIMER key

, when you want to switch off the heater and ignite it

again with the timer the next time. This not only switches off the heater, but

it also activates the timer function. As long as the TIMER light and the

information display

are blinking, you can change the required time with

the adjustment keys

(refer to Section F).

THE INFORMATION DISPLAY

The information display

not only serves as an indicator of the (set) time and

temperature (Sections C, E, and F), it also indicates any malfunctioning of the

heater. The code on the information display tells you what is the matter:

TIMER

FUEL

VENT

T E M P

CLOCK
TIMER

2 0 : 1 5

SET ROOM

H: The TIMER indicator

light indicates that the

timer function has been

switched on.

☞

Содержание Laser



































Результаты поиска

Содержание Laser

Отзывы:

Zibro Laser, Руководство по эксплуатации, Страница: 27 / 34

Результаты поиска

Содержание Laser

Отзывы: