ZIBRO HYBRID E
HEATER
Features
Quiet operation: The Zibro paraffin heaters are already well known to be the
most silent paraffin heaters available in the market. The built in fan is self-
regulatory and will turn to lower speed depending on the burning mode of the
heater. This results in less noise and less power consumption when the -by end
user- pre-set wished room temperature is reached.
Hybrid heater, 25% more heat output: Because of the combination of
electricity and paraffin (fuel) heating this heater provides a higher heating output
than comparible 100% paraffin heaters. Allowing to easily heat up large spaces
up to 160 m
3
.
Hybrid heater -hybrid boost- : A 2 step (400/800 Watt) additional PTC
electrical heating element will provide immediate heating capacity to heat up the
cold room extremely quickly. When working in hybrid mode the paraffin (fuel)
heating and electric heating will be working parallel at the same time until the
room temperature is less than 2ºC below the preset temperature. In this "hybrid
boost way" the user has the immediate maximum heating effect and the user is
sure his room is at the required temperature in the shortest possible time.
Hybrid heater, flexible heating method: The user can choose whether the
appliance can operate in paraffin (fuel) mode, electric mode, or hybrid mode (=
auto mode; appliance works in the combination of fuel and electricity).
Hybrid heater, for longer heating pleasure: Even when the paraffin fuel tank
has run empty this heater can still operate! The electrical heating element will
maintain the room temperature as much as possible (depending on the room
surface and heating load).
Fuzzy logic: This heater is equipped with a self-regulating temperature control
system. The heating mode can be set according to the requirements.
Semi-automatic operation: This heater is equipped with a 24-hour
programmable timer and integrated thermostatic control to maintain the desired
room temperature.
Wickless design: Provides clean and economical heating without wick
maintenance or replacement.
Automatic cleaning mode: When the heater has been burning for two hours
consecutively at its maximum burning mode it will automatically clean the burner
chamber for a period of 5 minutes.
Information display: Helps to keep track of all the important heater functions.
Safety devices: This heater is equipped with a combustion quality sensor, an
over-heat protector, a tip-over switch and a burner thermistor for safe heating.
Safety system: This heater is fitted with a safety system that automatically
switches off the heater after approximately 65 hours of continuous operation.
New Save mode: The 'SAVE' function allows you to remain the set temperature
in the room. This saves up to 8% on the energy consumption.
Childproof lock: When this button is pressed, the operation of buttons will be
blocked, except the on/off button.
Clean grip fuel tank cap: A new way to unscrew the removable fuel tank cap
without touching the tank directly.
Booster - Additional high burning mode: This feature provides 10% extra
heating capacity for 5 minutes, in addition to the heat output in the maximum
burning mode during a cold start (room temperature below 10
o
C and set
temperature above 15ºC).
Air quality control system (E-Guard): This heater is equipped with a E-Guard
air quality control system. The customer is informed when additional ventilation is
required. The heater will be switched off when the room is not ventilated
sufficiently.
Made in Japan: This heater has been produced according to the ISO 9000:2000
and NF 128 Quality Control Standard.
E-Guard
Day timer
Fuzzy Logic
Mode booster
Improved save mode
(+8%)
Hybrid technology
Freezing prevention
