4
30
2001
P7000 / P9000
3 .
AIR CIRCULATION
Press the ‘MODE’ button
L
to select the circulation function.
will appear
on the display.
Select the desired ventilator speed with the ‘FAN SPEED’ button
K
: high,
medium or low
.
‘LOUVER’ BUTTON
Pressing the ‘LOUVER’ button
M
activates an extra option. The vertical blinds
'turn' from left to right and back again to distribute the air over a larger area.
Pressing the ‘LOUVER’ button again de-activates this function.
C
WATER DRAINAGE
The red warning light
I
will flicker and the machine will emit a sequence of 8
audible signals when the water reservoir is full. A safety system ensures that the
compressor is switched off after 3 minutes. However, the ventilator will continue
to circulate air. Switch the machine off before removing and emptying the water
reservoir (fig. A).
EXTERNAL DRAINAGE DUCT
If required, it is possible to connect a drainage hose to the machine.
To do this, follow the directions below:
Pull the drainage spout
H
out of the machine.
Connect the small hose to the drainage spout (fig. C).
Drain the water through the hose to a water storage container.
Remove the hose after use. Perform these operations carefully to ensure that
the drainage duct remains intact.
D
‘TIMER’ SETTING
Using the Timer setting, the airconditioner will turn on or off automatically. To do
this, follow the directions below:
Press the ‘TIME SET’ button
O
while the airconditioner is activated. 24 Hr and
OFF will appear on the display.
E
Select with the ‘TIME SET’ button after how many hours you want the
airconditioner to de-activate.
Press the ‘TIME SET’ button
O
while the airconditioner is de-activated. 24 Hr
and ON will appear on the display.
E
Select with the ‘TIME SET’ button after how many hours you want the
airconditioner to activate.
2
1
4
3
2
1
2
1
C
C
A
A
