CoreView Videoscope
System: Operation
Step 8- Pull top lever towards you to articulate
scope tip “up” / push away to articulate “down”
Usage notes:
•
Be sure to straighten the scopes tip before
removing from a restricted passage
•
Videoscope articulation controller will hold it’s
position until re-adjusted
•
Please be aware that the CoreView 2.7
videoscope has a distal rigid tip length of 8 mm
and a bending section length of 15 mm… do not
force scope tip into inspection area
•
Scope shaft has a 30 mm minimum bend radius
•
Scope shaft is sealed & wipe-able (wipe with IPA-
avoid contact with any strong solvents acids)
www.zibracorp.com 1-800-758-8773 [email protected]
6
