manualshive.com logo in svg

Ziatech Corporation zPM10-2, Руководство по оборудованию, Страница: 16 / 94

Поделиться
Скачать
Ziatech Corporation zPM10-2 Скачать руководство пользователя страница 16

CHAPTER 2. GETTING STARTED

This chapter summarizes the steps required to get the zPM11 running. You should read this chapter
in its entirety before you use the board.

UNPACKING

Please check the shipping carton for damage. If the shipping carton and contents are damaged,
notify the carrier and Ziatech for an insurance settlement. Retain the shipping carton and packing
material for inspection by the carrier. Do not return any product to Ziatech without a Return Material
Authorization (RMA) number. The topic "Returning For Service" in Appendix C explains the
procedure you should follow to obtain an RMA number from Ziatech.

WHAT'S IN THE BOX?

After opening the shipping container, check for the following contents:

•

The zPM11 Super VGA PCI Mezzanine Adapter

•

On-Line Help disk for the zPM11

•

The zPM11 Drivers and Utilities diskettes (if ordered)

•

Nylon standoff - attached to board

•

Paper version zPM11 Hardware Manual (if ordered)

If any of the above items are missing, contact Ziatech for assistance. Be sure to save the anti-static
packing material for storing or shipping.

WARNING!

Like all equipment using MOS devices, the zPM11 must be protected from static discharge.

SYSTEM REQUIREMENTS

The zPM11 Super VGA PCI Mezzanine Adapter is designed to work with CPU boards that adhere to
the CompactPCI™ mezzanine specification. The zPM11 piggybacks onto the CPU board using the
150-pin CompactPCI mezzanine connector.

The zPM11 re5 VDC ± 5% @ .840 A maximum and .640 A typical. The ambient temperature
must be maintained between 0° and +65° Celsius to avoid improper operation and possible damage.
The relative humidity should be less than 95%, non-condensing.

The I/O and memory map for the zPM11 varies according to the video mode. For the safest
operation, allowing all modes to be used, I/O ports 100h through 104h, 46E8h, and 3B0h through
3DFh, as well as memory addresses A0000h through BFFFFh, should be reserved. The C0000h
through C7FFFh range should also be reserved for the video BIOS. If linear addressing is used, the
PCI BIOS will allocate a 16 Mbyte block of memory.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание zPM10-2































































































Отзывы:

Нет отзывов