C
OIN
S
ETTING
The shutter release mechanism uses a tem-
plate coin to determine the size coin needed to open the shutter. In
order to set the appropriate coin size, a coin of the type to be used to
activate the shutter (eg. a quarter or token) must be inserted in the
template coin slot. To insert a coin into the template coin slot, first
remove the coin activation control by loosening the four bolts which
hold the coinslot faceplate on and disconnecting the communication
cable from the back of the coin activation control. Once coin activa-
tion control is removed, lift the template coin sensor (the plastic piece
above the template coin with wires attached to it) away from the
template coin slot. Remove the existing template coin and replace
with the type coin which will be used to activate the shutter.
Reinstall the coin activation control and tighten all bolts and the unit
should be ready for use.
S
ETTING
C
OIN
S
IZE