Zhumell Dobsonian, Руководство пользователя

Страница: 4 / 11

A
SSEMBLING YOUR
T
ELESCOPE
B
ASE
A
SSEMBLY
1. Locate the bottom base plate (includes
teflon pads).
2. Turn bottom base plate upside-down (i.e.,
teflon pads down).
Note: You will need a user-supplied Phillips screwdriver and a user-
supplied adjustable wrench to assemble the telescope.
1
3
3. Attach plastic feet to bottom
base plate with 2’’ screws and
set aside.
4. Locate the top base plate, the
two side panels, and the front
brace.
10. Place a washer onto bolt
and slide bolt through the
axle sleeve (from top base
plate through to bottom base
plate).
11. Slide washer onto the bottom
of bolt.
12. Tighten nut onto bolt with
user-supplied wrench until
snug.
5. Screw front brace, handle grommets inwards
(shown) to side panels, spring grommets
outward (shown).
S
PRING
G
ROMMET
H
ANDLE
G
ROMMET
5
S
IDES AND
F
RONT
A
SSEMBLED
6. Screw 3-sided unit onto top base plate. The
base plate screw insets (shown) must face
away from the side brace assembly.
6
S
CREW
I
NSET
7. Place bottom base plate
on ground (feet down
and Teflon pads up) and
place axle sleeve into
center hole.
7
8. Center top base plate (with panels
attached) over bottom base plate and
slide onto axle sleeve.
9. Tip unit onto its side.
8
12
11