7
Adjusting the angle of your telescope, or pointing it at what you’d like
to view, is simple. Follow these instructions o accurately and securely
adjust your telescope.
1.
Only adjust the telescope one axis at a time. This will keep it
secure on the other axis while you make the change.
2.
To move the telescope up or down, loosen the flip-lever located
on the right side of the arc-mount. Once you’ve set the scope
where you want it, retighten the flip-lever to secure the telescope.
3.
To turn the telescope on it’s horizontal axis, loosen the
thumbscrew located near the base of the mount column. Once
you’ve set the scope where you want it, retighten the thumbscrew
to secure the telescope.
4.
Always make sure that you’ve secured the telescope after making
an adjustment.
FOCUS AND ZOOM YOUR
ZHUMELL BRASS TELESCOPE
To focus the telescope, turn the copper focus knob located in
front of the eyepiece. Do not force the focus knob as you may
damage the focusing mechanism.
ADJUSTING THE ANGLE OF YOUR
ZHUMELL BRASS TELESCOPE
SETTING UP YOUR
ZHUMELL BRASS TELESCOPE
5.
Carefully lift the optical tube assembly and legs until the entire
telescope is in standing position. Spread the legs as far as the chain
will allow and double-check that all connections are secure. Your
Zhumell Brass Telescope is ready to use.
