2.
Charging for speaker
The speaker comes with a built-in rechargeable battery, prior to using it, it is
recommended to charge the battery fully for the first time.
When the speaker is low power, the speaker emits a string of warning tones
every
1 minutes and the red LED flashes. Please recharge the battery of the
speaker.
The way of charging as following:
Using USB cable
1.
Plug the USB cable into the USB port of PC
2.
Plug another side of cable into the charging jack of speaker
Red light on: Charging
Red light off: Finish charging
3.
It will takes about 3 hours to finfish charging
Remarks:
1)
The battery is recyclable.
2)
Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat place, such as sunshine, fire or the like.
Getting started
1.
Turning on/off the speaker
Functions
Operation
LED indicator
Prompt tone
Turning on
Make the power
switch to ON
Blue LED on
one second
4 raise tones
Turning off
Make the power
switch to OFF
Red LED on
one second
4 fall tones
2. Pairing the speaker with Bluetooth devices
1) How to enter pairing mode
Functions
Operation
LED indicator
Entering
pairing
mode
Ensure the speaker is on,
otherwise please turn it on first.
And then long press
button
about 4~6 seconds until red and
blue LED flash alternately
Red and blue LED
flash alternately
3
