Zhone zNID-GPON-2402, Руководство по настройке

Страница: 87 / 226

Factory default VLAN definition
zNID 24xx Series Configuration Guide
87
Factory default VLAN definition
Table 31 shows the VLANs set as the factory defaults
VLAN 7 is the default management VLAN. The fiber uplink ports are tagged
members of this VLAN. The ONU is also configured to have DHCP enabled
on VLAN 7. With this arrangement, the 24xx can be connected to the MXK
and is ready to be remotely managed on VLAN 7 and pass data on VLAN 200
without any further configuration needed on the 24xx.
All downstream gigabit Ethernet interfaces have the Port VLAN ID (PVID)
set to 200 by default. VLAN 200, the default data VLAN is also set as the
PVID for the wireless SSID 0 (wl0).
Figure 58: Default VLAN and port interface settings
For more information about PVID see Edit Port Defaults on page 145 .
Figure 59 shows how the default interfaces from Figure 58 and Figure 31 are
displayed in the Web UI.
Table 31: Factory default VLANs
VLAN Type Tagged/Untagged Port IP address
7 Bridged Tagged eth0 (Fiber WAN
– GPON or GigE) DHCP enabled
100 Bridged Tagged eth0 (Fiber WAN
– GPON or GigE) n/a
200 Bridged Tagged eth0 (Fiber WAN
– GPON or GigE) n/a
200 Bridged Untagged GE1 to GE4
(GigE) Static,
192.168.1.1
300 Bridged Tagged eth0 (Fiber WAN
– GPON or GigE) n/a