Zhone zNID-GPON-2402, Руководство по настройке

Страница: 86 / 226

Configuration
86
zNID 24xx Series Configuration Guide
Interfaces
Interface naming conventions
zNID 24xx ONUs will support the following default interface names for the
physical interfaces:
•
eth0 — Fiber WAN interface (either GPON or GigE)
•
eth1 — GigE port 1
•
eth2 — GigE port 2
•
eth3 — GigE port 3
•
eth4 — GigE port 4
•
wl0 — Wireless LAN SSID 0
•
wl0_1 — Wireless LAN SSID 1
•
wl0_2 — Wireless LAN SSID 2
•
wl0_3 — Wireless LAN SSID 3
Note:
The type and number of interfaces depends on the model of the
zNID. See zNID 24xx models and interfaces on page 17 for more
information.
Ethernet port
The ONU has a default IP address of 192.168.1.1 on the LAN Ethernet ports.
The user can connect a standard PC to the LAN ports (eth1-eth4) and
configure the ONU using a standard web browser. The PC will need to have
an IP address on the same subnet. Typically, 192.168.1.100 is used. Of course,
if you change the IP address of the ONU, you will lose connectivity. You
would then need to reconfigure your PC to be on the same subnet.
See Logging in on the Ethernet ports on page 29 .