Zhone zNID-GPON-2402, Руководство по настройке

Страница: 101 / 226

Configuration pages
zNID 24xx Series Configuration Guide
101
To edit a bridge, enter a check in the bridged interface in the select row at the
top of the table, then click
Edit Selected Interface .
The table displays Bridged Interfaces along with any IP Addresses that have
been assigned to them for the purposes of enabling management access or
supporting SIP, SIP-PLAR or MGCP clients. The naming convention for
Bridged Interfaces is “brvlan” followed by the VLAN ID. Bridged Interfaces
are automatically sorted and displayed in ascending VLAN ID order.
Routed
The Internet Protocol (IP) is a network-layer (Layer 3) protocol that contains
addressing information and some control information that enables packets to
be routed. IP is documented in RFC 791 and is the primary network-layer
protocol in the Internet protocol suite.
The Interfaces | Routed page displays the routed interfaces which have been
defined and the IP address assigned to that interface.
To create routed interfaces see Creating routed connections, page 166
Figure 73: Routed interfaces
To edit a routed interface, enter a check in the routed interface in the select
row at the top of the table, then click
Edit Selected Interface .