Logging in to the 24xx series zNID
zNID Hardware Installation Guide
29
Logging in to the 24xx series zNID
The zNID 24xx series may be managed from OMCI, Web UI or CLI. This
section describes logging into the zNID locally using the subscriber facing
LAN port, GE1.
Figure 8: Log into GE port 1 to reach the Web UI or CLI on the zNID
To login with a browser:
1
Connect an Ethernet cable from your computer to GE1 on the zNID.
2
Launch a browser and point it to 192.168.1.1.
3
Enter the username and password.
The default username/password is admin/zhone.
To login with a telnet session:
1
Connect an Ethernet cable from your computer to GE1 on the zNID
2
Launch a telnet session and point it to 192.168.1.1.
3
Enter the username and password.
The default username/password is admin/zhone.
