Administration
104
Z-Edge 64 Configuration Guide
Modify the following parameters in the trap-destination profile to set up a
trap destination:
The resendseqno and ackedseqno parameters are set by the ZMS. The
following example configures a trap recipient with the IP address
192.168.3.21:
zSH> new trap-destination 32
Please provide the following: [q]uit.
trapdestination: -> {0.0.0.0}: 192.168.3.21
communityname: ---> {}: public
resendseqno: -----> {0}:
ackedseqno: ------> {0}:
traplevel: -------> {low}:
traptype: --------> {0}: 2
trapadminstatus: -> {enabled}:
gatewaytrapserveraddr: -> {none}:
....................
Save new record? [s]ave, [c]hange or [q]uit: s
New record saved.
Note:
For communication with the ZMS, setting trap destinations
can be done from the CLI or by the ZMS. Refer to the ZMS
Administrator's Guide and the NetHorizhon User's Guide for more
information on working with the ZMS.
User accounts
Z-Edge 64 users have access to the CLI and are able to configure and
administer the system.
Adding a user
Every administrative user on the system must have a user account. The
account specifies their username and password, as well as their privilege
level, which determines their access to commands.
Note:
When entering access level responses, enter yes completely or
the CLI interprets the response as no.
Parameter
Description
trapdestination
The IP address of the SNMP manager.
communityname
Community name to be sent in all
traps sent to this destination.
traptype
Array of allowed categories to be sent
to this particular trap destination.
