Zhone IMACS 8000, Руководство пользователя

Страница: 489 / 788

Data Cards 16-5
LDSRU-10P Card LD-SRU Card User Screens and Settings
Table 16-1. Main Screen Actions
Table 16-2 lists the SRU Card Main Screen parameters and available option settings.
Table 16-2. Main Screen Option Settings and Defaults
Notes:
1. Time slot 16 is not available if the port is assigned to an E1 WAN link whose TS 16 is
programmed for cas or ccs.
2. Although offered as frame options, b-10, b-20 and x.50 are not supported. Additionally.
b-5 circuits must be confined onto two groups: 1 through 5 and 6 through 10.
Action Function
Save Saves changes to settings.
Undo Returns all settings to the last saved state.
Refresh Updates certain time-related information fields that are not automatically
updated (i.e., test status).
Copy Copies the contents of the current column to the next column. Useful if you
change a lot of entries in one column and want to repeat those changes in
subsequent columns.
Test Initiates and monitors testing of all SRU card ports. Refer to the Test section
of this chapter.
Main Returns to the System Main Screen. If changes are made to settings and not
saved, you will be prompted to save or lose changes.
Parameter User Options Notes Default
STATE stdby act stdby
WAN/SRV none wan (w1-1 through w4-2) serv (P1 through P3) w1-1
TS 01-24 01-31 1 01
FRAME a b-5 b-10 b-20 x.50 adpcm hlink nlink 2 a
RATE .3 1.2 2.4 4.8 9.6 14.4 19.2 28.8 38.4 3 .3
SR TS n/a 1 1-5 1-10 1-20 1
INTF asyn sync v.14 asyn
8 7 6 5 8
COM CF 1 2 4 1
none odd even space mark none
CTS perm l0 l30 l60 l100 rl0 rl3 rl6 rl10 off perm
TX CLK n/a int ext n/a
LB off dte net off
LB GEN n/a off ocu csu dsu off
LB DET n/a w/to on off off
DL OPT off on 5 n/a
ADPCM n/a P1 P2 P3 n/a
MAJ ERR off on none 10e-3 10e-4 10e-5 10e-6 10e-7 6 off