Zhone IMACS 8000, Руководство пользователя

Страница: 386 / 788

12-4 Voice Cards
Model No.
Running Head
FXS Card User Screens and Settings FXS Card
Table 12-1. Main Screen Actions
Table 12-2 summarizes the configuration settings for the FXS cards, along with the available
and factory-default option settings. The parameters and settings are also described in the
following paragraphs.
Table 12-2. Main Screen Option Settings and Defaults
Notes:
16. Choosing wan allows you to choose a WAN port (w1-1 through w4-2). Choosing serv lets
you choose an ATM or FRS server card in slot P1, P2, or P3, followed by a logical port
on that card. If your system has the FRS card installed and you want to use voice
compression you need to install the Low Bit Rate Voice (LBRV) card. However, if your
Action Function
Save Saves changes to settings.
Undo Returns all settings to the last saved state.
Refresh Updates certain time-related information fields that are not automatically
updated (i.e., test status).
Copy Copies the contents of the current column to the next column. Useful if you
change a lot of entries in one column and want to repeat those changes in
subsequent columns.
Test Initiates and monitors testing of all FXS card ports. Refer to the Test section of
this chapter.
Dial Primary or Hunt Group telephone number entry menu.
Main Returns to the System Main Screen. If changes are made to settings and not
saved, you will be prompted to either save or lose your changes.
Parameter User Options Notes Default
STATE stdby actv stdby
WAN/SRV none wan serv user 1 w1-1
TS 01-24 01-31 2 01
MODE fxs fxsdn wink plar dpo slc96 fxs
TYPE loop lp-fd gs gs-i gs-a 1s-R2 1sR2e R1.5i
R1.50 sp 3 loop
Rx TLP -10.0 dB to +2.0 dB 0.0
Tx TLP -10.0 dB to +5.0 dB 0.0
CODING u-law a-law a-inv 4 u-law
TC CGA idle busy idle
LB off dgtl anlg off
PATTERN none D-mW quiet none
HYBRID set1 to set8 user 5 set1
RINGBK off on off
SIG CONV off on off
RATE 64K 24K,1 32K,1 40K,1 24K,2 32K,2
40K,2 6 64K
ADPCM n/a P1 P2 P3 n/a
ISDN CON off on off