Zhiyun WEEBILL 3S, Руководство пользователя

Страница: 27 / 53

23
How to Use WEEBILL 3S
Motor Torque Adjustment
*To enter: Switch the gimbal mode to V mode, press the fill light control wheel in
the V Mode Setting menu.
To exit: Single press the mode switch.
**AB point settings are only available when connecting to ZHIYUN Servo Follow
Focus correctly.
After balancing WEEBILL 3S, the motor torque needs to be adjusted for proper
function. You can adjust the motor torque according to the weight of your camera
and lens, so that the WEEBILL 3S can be used in its ideal state. Following are three
methods for adjustment. It is recommended to use auto-calibration.
1. Auto Calibration
Auto calibration will adjust the motor torque according to the weight of the
carried camera and lens.
Operation steps: Press Menu / Return button to enter the menu. Rotate the fill
light control wheel to select “Motor torque” and press the wheel to enter the next
menu. Rotate the control wheel to select “auto calibration” and press the control
wheel to confirm. The gimbal will then enter auto calibration mode. Please don’t
touch the gimbal and wait for the display screen to show the “
√
” mark after the
gimbal shakes. The auto calibration is then complete.
2. Custom
The power determines the torque of the motor, and needs to be adjusted
according to the camera and the lens on the gimbal. The power should be
proportional to the weight of the load. A high power value will cause the gimbal
itself to vibrate, while a value that is too low will affect the stability of the gimbal.
Operation steps: Press Menu/Return button to enter the menu and select
“Motor Torque”. Press the fill light control wheel to enter the next menu. Rotate
the control wheel to select “custom” and press the control wheel to enter the
adjustment interface. Rotate the control wheel to select the axis you wish to
adjust and press the 24 control wheel to confirm. To set the power value, you can
rotate the control wheel. To complete the setting, press the control wheel to exit
the interface, press the Menu/Return button to save the settings and return to the
previous menu. When the display screen shows the “
√
” mark, the adjustment is
complete.