Zhiyun Evolution, Руководство пользователя

Страница: 21 / 30

16 zhiyun-tech.com
Initializing the Stabilizer
Initialization Procedure
Off-line Calibration
Initialization
Initialize the stabilizer when any of the following circumstances occurs:
a)Slight deviation is found in the tilt angle of the camera in level position after startup.
b)Slight deviation is found in the roll angle of the camera in level position after startup.
c)Frequent small angle correction is found when the camera is in level position while the
stabilizer stays still.
1. Install the batteries and camera properly.
2. Put the stabilizer still on a table surface in random
pose.
3. Power on the stabilizer, wait for about 15 sec.,
and the stabilizer will automatically complete
initialization.
Calibrate the stabilizer when any of the following circumstances occurs:
1. Deviation is found in the balancing of the camera even after initialization.
2. The stabilizer has not been used for a long time.
3. The stabilizer is exposed to severe temperature change (Calibration is required, as excessive temperature
differences in operation environments may affect various parameter indexes of the inner part of the built-in
gyroscope).
If slight deviation can still be found after initialization, repeat the procedure above to initialize again.