Zhiyun Crane Plus, Руководство пользователя

Страница: 8 / 20

9 zhiyun-tech.com 10 zhiyun-tech.com
Camera Installation Camera Installation
Operation Method
Top Down Mode Bottom Up Mode
Gimbal balance shall be properly adjusted before accessing Bottom Up mode. Do not rotate the
handle while turning it straight up/down to switch between Top Down and Bottom Up mode.
Note: The size of the camera and its balance condition when mounted may affect the successful
access to Bottom Up mode. For certain camera models, balance should be adjusted after
access to Bottom Up mode.
When the motor arm is pulled to an extreme extent in case of big lens mounting, Bottom Up
Holding Gesture may not be supported.
1
1
2
2
3
4
Mount the camera in parallel with the mounting plate, match the 1/4" Threaded Hole at the
bottom of the camera with the empty slot of the mounting plate. Move the camera as close
as possible to the Tilt Motor, and tighten the Camera Mounting Screw
❹
to fix the camera
positionTilt Motor, and tighten the Camera Mounting Screw
❹
to fix the camera position.
Do not power on the stabilizer before the camera is properly mounted.