Zhiyun Crane 3 Lab, Руководство пользователя

Страница: 14 / 37

10
Installation
To facilitate the adjustment procedure, we recommend locking the three axes
before the adjustment and unlock and adjust them one by one.
• Make the lens face up, slightly loosen the
thumb screw of the tilt axis, push the cam-
era to move forward or backward until the
camera can stay still with the lens facing up
(i.e.the camera stays still and vertical to the
ground as shown on the right). Complete
this step by tightening up thumb screw.
• Unlock the tilt axis and the quick release
plate latch, push the camera to move for-
ward or backward until the camera can stay
still and almost level with its lens facing
front (as shown on the right), then lock the
quick release plate latch.
• Loosen the quick release plate thumb screw
and make the camera grip as close to the
tilt axis motor as possible.
Balance Adjustment