Zhejiang CWL1801A, Инструкция по эксплуатации

Страница: 2 / 9

SPECIFICATIONS
Work area safety
CWL1801A CWL2101A
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
3.01 3.11
Electrical Safety
D.C 18V D.C 21.6V
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
• Due to our continuing programme of research and adapter plugs with earthed (grounded) power
development, the specifications herein are subject tools. Unmodified plugs and matching outlets will
to change without notice. reduce risk of electric shock.
• Specifications and battery cartridge may differ 5. Avoid body contact with earthed or grounded
from country to country. surfaces such as pipes, radiators, ranges and
• Weight, with battery cartridge refrigerators. There is an increased risk of
General Power Tool Safety electric shock if your body is earthed or grounded.
Warnings 6. Do not expose power tools to rain or wet
WARNING Read all safety warnings and all conditions. Water entering a power tool will
instructions. Failure to follow the warnings and increase the risk of electric shock.
instructions may result in electric shock, fire and/or 7. Do not abuse the cord. Never use the cord for
serious injury. carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
Save all warnings and moving parts. Damaged or entangled cords
instructions for future reference. increase the risk of electric shock.
The term "power tool" in the warnings refers to your 8. When operating a power tool outdoors, use an
mains-operated (corded) power tool or battery-operated extension cord suitable for outdoor use. Use of
(cordless) power tool. a cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
0-2100
800
Model
251
Battery Capacity
Length（mm)
No load speed(rpm)
Impact per minite
Max. Torque (NM)
Capacities
M12-M24
0-1900
Votage
Net Weight(kgs)
Toolholder
3/4''
Charge time
1H
3.0AH
2