Zhejiang Uniview Technologies NVR208-16/32, Быстрое руководство

Страница: 22 / 32

15
NOTE!

The IP Camera window will be displayed if you do not select Enable
IP Camera auto-add function . If you select Enable IP Camera
auto-add function , the IP Camera window will not display.

By default, all the found IP cameras can be added if the number
is within the allowed limit. If the status of an IP camera is
Connected , it means the camera is added successfully. If the status
is Disconnected , check whether the network connection is normal
or the username and password are correct.

Storage: a 24-hour recording plan is enabled for all the channels by
default. You can choose a channel and set the recording type as
needed.
You can use the preview function after the Wizard completes, but you
need to log in first to use other functions. The default username is
admin, and the default password is “123456”.
Channel Management
Make sure the IP cameras you want to configure are connected to your
device through the network.
Adding an IP Camera by Auto-Add
NOTE!
If there is more than one device in the network, do not enable Auto-Add
IP Camera . Add IP cameras by search or manually.
1. Click Menu > Channel > Channel .
2. Enable Auto-Add IP Camera and click OK . And then the IP cameras
in the same network are added automatically.