Zhejiang Uniview Technologies IPC220 Series, Быстрый старт

Страница: 4 / 25

Warnings:
z
If the product does not work properly, please contact your
dealer or the nearest service center. Never attempt to
disassemble the camera yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or
maintenance.)
z
This installation should be made by a qualified service person
and should conform to all the local codes.
z
Make sure the power supply voltage is correct before using
the camera.
z
Do not drop the camera or subject it to physical shock.
z
Do not touch sensor modules with fingers. If cleaning is
necessary, use a clean cloth with a bit of ethanol and wipe it
gently. If the camera will not be used for an extended period
of time, put on the lens cap to protect the sensor from dirt.
z
Do not aim the camera lens at the strong light such as sun or
incandescent lamp. The strong light can cause fatal damage
to the camera.
z
The sensor may be burned out by a laser beam, so when any
laser equipment is being used, make sure that the surface of
the sensor not be exposed to the laser beam.
z
While shipping, the camera should be packed in its original
packing.