5
Setting Data
Designation
Dimensions
Measuring
instrument
Comment
Chapter/section
4 Nm – 10 Nm
Torque wrench
with dial gauge
▪
Install input, page
e. g. 0.22 mm (±0.0
4 mm)
Dial gauge
For ideal value see Reassemble
differential
▪
Setting backlash and differential
bearing rolling torque and checking
axial run-out and contact pattern.,
page
max. 0.08 mm
Dial gauge
▪
Setting backlash and differential
bearing rolling torque and checking
axial run-out and contact pattern.,
page
4 Nm – 7 Nm
▪
Setting backlash and differential
bearing rolling torque and checking
axial run-out and contact pattern.,
page
Total rolling torque at axle ratio
Total rolling torque =
Pinion bearing rollin
g 2 Nm (±1
Nm)
Torque wrench
with dial gauge
▪
Setting backlash and differential
bearing rolling torque and checking
axial run-out and contact pattern.,
page
Total rolling torque at axle ratio
Total rolling torque =
Pinion bearing rollin
g 1.5 Nm (
±0.5 Nm)
Torque wrench
with dial gauge
▪
Setting backlash and differential
bearing rolling torque and checking
axial run-out and contact pattern.,
page
4.5 Nm – 10.5 Nm
Torque wrench
with dial gauge
(with shaft seal)
▪
Install shaft seal onto the drive,
page
0.01 mm preload–
0.05 mm clearance
Dial gauge
▪
Assemble left portal drive, page
▪
Assemble right portal drive, page
0.03 mm preload–
0.03 mm clearance
▪
Assemble left portal drive, page
▪
Assemble right portal drive, page
Setting Data
14
EN 4472.751.001 - 2015-11
Содержание AV 133
Страница 1: ...REPAIR INSTRUCTIONS AV 133 Bus axle with compact bearing BUSES...
Страница 137: ......