![ZF-DUOPLAN 2K120 Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/zf-duoplan/2k120/2k120_operating-instructions-manual_3559929005.webp)
Operating Instructions
2K120/2K121
Preface
5
1
Preface
This documentation is intended for specialists who
have experience to carry out maintenance and
repair work.
The ZF product is documented in accordance with
the design status as of the issue date.
The following safety notices are used in these
operating instructions:
NOTE
Used to highlight special sequences, methods,
information, etc.
CAUTION
Used when incorrect and improper operating
procedures can cause damage to the product.
DANGER!
Used when due lack of care and attention
can cause injury to personnel and/or damage
to property.
ENVIRONMENTAL
HAZARDS!
Lubricants and cleaning products must not be
poured onto the ground, into groundwater or
down the drain.
• Obtain and comply with the safety
regulations relevant to these products
issued by your local environmental
authority.
• Collect used oil in a suitably large
container.
• Dispose of used oil, clogged filters,
lubricants and cleaning products in
accordance with local environmental
protection regulations.
• Always follow the instructions issued
by the manufacturer when handling
lubricants and cleaning products.
1.1
Safety instructions
•
All persons repairing ZF units are responsible for
their own work safety.
•
Every applicable safety regulation and legal
requirement must be complied with in order to
prevent injury to personnel and/or damage to
the product during the course of maintenance
and repair work.
•
Repair staff should familiarize themselves with
these regulations before commencing work.
•
Correct and proper repair of these ZF products
can only be assured by appropriately trained
specialists.
•
The organization in charge of repairs is
responsible for ensuring that such training is
given.
•
Read these operating instructions carefully
before commencing any testing or repair work.
CAUTION
Pictures, drawings and components do not
always represent the original object but are used to
illustrate working procedures.
The illustrations, diagrams and parts are not drawn
to scale and no assumptions should be made
regarding size and weight (including within a single
illustration or drawing).
Work must be performed as described in the text.
Following the completion of repair work and
testing, the specialists must satisfy themselves that
the product will function perfectly again.
1.2
ZF instructions
•
Remove any traces of old seals or gaskets
from mating faces. Use an oil stone to carefully
remove any burrs or similar irregularities.
•
Carefully cover or shield open gearboxes to
prevent the ingress of foreign matter.
!
!