9
8
Component list of
pressure measuring system:
1 Cuff
2 Air pipe
3 PCBA
4 Pump
5 Valve
Monitor Components
CUFF
List
1. Blood Pressure Monitor
(UAM-820BT)
4. User manual
3. 4*AA Batteries
2. Cuff ( 23~37cm)
(Type BF applied part)
The Choice of Power Supply
1
.
Slide off the battery cover.
2
.
Install the batteries by matching
the correct polarity, as shown.
3
.
Replace the cover.
1
.Battery powered mode:
6VDC 4*AA batteries
2
.AC adaptor powered mode:
6V 1A (Not included)
(Please use the AC adaptor which
authorized by the manufacturer!)
Right picture is the hole for power
adaptor.
Installing and Replacing the Batteries
Replace the batteries whenever the below happens
The shows
The display dims
The display does not light up
BEFORE YOU START
INTRODUCTION
In order to get the best effect and protect your monitor,please use the
the right batteries and special power adapter which complies with local
safety standard.
CAUTION
CAUTION
Do not use new and used batteries together.
Do not use different types of batteries together.
Do not dispose the batteries in fire. Batteries may explode or leak.
Remove batteries if the device is not likely to be used for some time.
Worn batteries are harmful to the environment. Do not dispose with daily garbage.
Remove the old batteries from the device following your local recycling guidelines.
START/STOP BUTTON
5.Carry bag
BATTERY COMPARTMENT
LCD DISPLAY
AIR HOSE
AIR CONNECTOR PLUG
