22
The infrared thermometer has been tested and conforms to the standard
ASTM E1965-98. ASTM laboratory accuracy requirements in the display
range of 98°F to102°F (37°C-39°C) for skin IR thermometers is ±0.5°F
(±0.3°C). Note that for mercury-in-glass and electronic thermometers, the
requirement per ASTM Standards E667-86 and E1112-86 is ±0.2°F
(±0.1°C).
Security Class
■
Type of protection against electric shock: internally powered equipment.
■
Degree of protection against electric shock: Type BF applied part.
■
Degree of protection against ingress of water: IPX0
■
Safety degree of using in flammable anesthetic gas blending with air,
oxygen or nitrous oxide: Non-AP/APG
■
No application parts of the thermometer prevents defibrillation charge
effect.
■
No application parts of the thermometer output signal.
■
The thermometer is impermanent installed device.
Storage and Transportation
1)
Transportation
The thermometer can be transported using general transportation tools.
Severe vibration, shock, or rain must be avoided during transportation.
2)
Storage
The thermometer must be packaged and then stored in a well-ventilated
room without corrosive gas. The ambient temperature must be between
–20°C and +55°C
（
-4°F–131°F
）
, the relative humidity must be lower than
95% (non-condensing), and the atmospheric pressure must be 50–106 kPa.