Zeutschel OMNISCAN 5000, Руководство пользователя

Страница: 7 / 11

6
Installation of the OMNISCAN 8.x scanner software with DONGLE (optional)
please see seperate instructions TS-0306
Installation of the OMNISCAN COPYSCAN software with DONGLE (optional)
Install the optional SCSI-interface pcb ADAPTEC into the server-pc (only if not already
pre-installed).
Switch-on the scanner OS 5000 COPYSCAN
Switch-on the server-pc, while booting the OS 5000 has to identify itself at ID 5 with the
name " ZEUTSCH. OMNISCAN 5000".
Now install the COPYSCAN software.
Please load the first disk in the disk drive "A" and select run a: setup.
Install the DONGLE onto the printer socket at the server-pc and laod the dongle driver
disk.
Select run a: HLDRV32.exe
After a succesful installation start the COPYSCAN-software and release the first scan.
For correct document positioning and focus adjustment we refer to the operation
instructions.
In case the fault message "cannot load WINASPI" appears you have to install the
software "Adaptec EZ-SCSI v.4.01" too and to restart the COPYSCAN-software.