2
Getting started with the XP-11:
Press the ON/OFF button on the top right side of the headlamp to turn the
XP-11 on.
When you turn the XP-11 the light brightness will be on a
high setting. Press again and the XP-11 will go to low light mode,
press again and the XP-11 will be on strobe mode.
Press again to go to
red light mode. Press again to activate red strobe light. Press again to turn
the XP-11 off again.
ON/OFF by button is not the only way to turn the XP-11 ON and OFF. The
XP-11 can also be turned ON and OFF by motion sensor. You need to
press the motion sensor button on the top left side of the headlamp. The
XP-11 is set to ON/OFF by motion sensor. Move your hand/arm on less
then 10cm from the front of the XP-11 and the lamp will turn on/off. Press
the motion button again to turn the motion mode off.
The headband size of the XP-11 can be adjusted with the black clips on the
headband. The XP-11 light beam can be pointed 45º downwards by holding
the headband plastic holding part and pushing the headlamp unit
downwards.
When the XP-11 is totally empty or the light becomes dim supplied micro
USB cable can be used to recharge the XP-11. Charging is being done true
the micro USB connection on the bottom of the XP-11. A LED indicator
next to the Micro USB charging port (on the bottom of the XP-11) shows
the charging status, red means still charging and green means fully
charged. A full recharge will take around 3-4 hours.
For more questions and support please go to
