Charging
First open the door flaps
to access the hidden ports, then
connect the keychain to a USB charger using the included
USB cable. Plug the small end of the USB cable to the USB
data/charge port
. The red indicator light
will flash on
and off during charging and then will stay on solid once the
battery is fully charged.
It is recommended to use an AC wall to USB adapter of at
least 1000mAh for faster charge. If charging using a USB
port of a computer, please ensure the computer is on or that
the port is a power exclusive USB port. Look for the charge
symbol near the USB symbol
Media Installation
Please install a MicroSD
memory card before operation.
Endure the memory card
golden pins are facing up. You
may make have to push the
card in with your fingernail or
the tip of a butter knife all the
way until you feel it click in.
Power On/Off
To turn the camera device in the keychain on or off, press and
hold the unlock button
for 2 seconds. The device will
automatically shut off if idle after 1 minute.
GETTING STARTED
