In
"P"
mode (the V|P key is set to P), when the
ON/OFF key is turned to the ON position, the blue light will
blink three times and go off to enter the motion detect
mode. At the same time, the yellow power indicator light
will be on for seconds, then will go off. When motion is
triggered, the video recording will automatically start and
one new file will be saved every minute. If no motion is
triggered the system will enter the low-power standby
mode, and there will be no indicator light under "P" status.
（
5) Auto mode switch
Slide the switch key to OFF position, the red and blue
will
blink three times at the same time and then
turn off
. Video
is
saved and camera turn
s
off.
The camera supports the
automatic
switching of V
(continuous video recording mode) and P (motion detection
video recording mode / low power consumption mode)
,
the
yellow light will be on for 10 seconds each time to display
the remaining battery power when you switch the mode.
（
4
）
Motion-activated recording and storage
（
6
）
Charging
Charging the charger:
C
onnect
an A/C
-
to
-
USB adapter to
the wireless charger camera device using the inlcuded
micro USB data cable.
You can also charge it by
connecting it to a computer's USB port.
T
he yellow light will blink in sequence. After the battery is
fully charged, all the 4 yellow lights will be on
solid
.
Charging your phone:
Set the ON/OFF swith to the O
N
position then place a smart phone with wireless charging
support centered on the charging device, your phone will
indicate when its charging.
