ZETRON 4000 Series Скачать руководство пользователя страница 238

Страница: 238 / 418

IntegratorRD Workstation Installation

238

025-9533Y

• Intuitive display – provides compact, clear, and concise identification of control

information.

• Large easy-to-use screen buttons – screen buttons “respond” to touch or mouse

activation in 3-D fashion; the buttons appear to depress when touched. Color and

the 3-D effects indicate function status.

• Screen organization allows control of up to 36 channels at all times, even when

performing auxiliary I/O, paging, or setup functions. Menu functions do not restrict

channel operation, such as transmit, select, frequency select, and mute.

• Supports touch-screen and/or mouse operation with panel keypad for encoder entry

and special functions. In addition to the standard Audio Panel keypad, the optional

Model 4115 Expansion Panels can be included for systems with substantial

auxiliary I/O or Instant Call paging requirements.

• Compatible with standard, serial bus, touch-screen monitors.
• Flexible audio panel options allow for remote or rack mounted speakers, encoder

and function keypad, speaker volume control, large 24-hour time clock, and VU

meter.

• Advanced, one-touch, channel group operation for multiple selects, transmits, and

patches. Group definition performed by operator.

• Patching capacity of up to 24 simultaneous, cross-channel patches.
• One-touch paging operation, using named buttons instead of pager codes.

Hierarchical menu allows pages to be logically organized for quick access.

• ANI (with alias translation). Translates the caller’s ID into a configurable name and

displays it on the receiving channel.

• Near “turn-key” operation. No complicated utilities requiring special skills. Simply

define the common control setup using the included Radio Dispatch Programming

Software.

Hardware Installation

This section provides instructions for the installation of the IntegratorRD workstation

hardware, including cabling.

Содержание 4000 Series



































































































































































































































































































































































































































Результаты поиска

Содержание 4000 Series

Отзывы:

Похожие инструкции для 4000 Series

Бренды по названию

Популярные бренды

ZETRON 4000 Series, Руководство по установке

Результаты поиска

Содержание 4000 Series

Отзывы:

Похожие инструкции для 4000 Series

Бренды по названию

Популярные бренды