Overview
9
Installation
!
Caution!
This equipment generates, uses, and can radiate radio
frequency energy. If not installed and used in accordance
with the instruction manual and commonly used radio
practices, it may cause interference to radio
communications. Only personnel experienced with consoles
and radio systems should install the iRIM.
Overview
shows an example system installation. Each radio connects to a port on the
iRIM iDEN i365 Adapter through one of the supplied radio interface cables. Ethernet
cables connect the iRIM Adapters to the iRIMs. The supplied RJ-45 cable, or any
standard eight-conductor RJ-45 cable, such as an Ethernet cable, connects the iRIM to a
punchdown block, which is then wired to the two channels on the console system. The
link between the console system and the iRIM is not limited in distance, so it may be
extended by means such as a leased line. The iRIM may be installed in a standard 19-inch
rack using the optional rack-mount adapter.
Installation of the iRIM is done in two phases:
•
Configure system components
•
Install and connect system components
Before beginning installation, read all of this section to become familiar with the system.
Содержание 025-9623 D3
Страница 1: ...Intelligent Radio Interface Module for Motorola iDEN i365 025 9623 D3...
Страница 18: ...Installation 18 025 9623 D3...
Страница 53: ...Tone Remote Interface 53...
Страница 55: ...Index 55 TX Voice Delay 46...