![background image](http://html1.mh-extra.com/html/zetron/025-9623-d3/025-9623-d3_manual_3534601024.webp)
Quick Setup for Zetron Consoles
24
025-9623 D3
3.
Connect a true RMS AC voltmeter to the receive audio output pair from the iRIM
to the console. (For the pinout, see
on page
4.
Measure the loss between the iRIM and the console by transmitting a tone on a
field radio or using a service monitor, and measure the level at the iRIM’s
receive audio output pair, and again at the UDCC receive audio input. This
measurement will be used in Step
5.
Following the directions in the previous sections, return to the
Channel A
Configuration
or
Channel B Configuration
page.
6.
Leave the
Peak Level From Console
setting at its default.
7.
Set the
Audio Level From Console
to measured value in Step
, which
corresponds to a 60% channel deviation. The iRIM default for the
Audio Level
From Console
is -7 dBm.
8.
Set the
Audio Level To Console
to the sum of the line loss measured in Step
in dB, and the Audio Level From Console setting. This assumes the console is
expecting to receive the same audio level as it transmits. (Otherwise add the line
loss to the console’s expected receive level.)
9.
Click the
Submit
button. This will return to the
View/Modify Configuration
page.
!
Caution!
If any changes were made to the channel parameters they
have not been saved yet.
10.
The previous steps may be repeated for Channel B. Click the
Channel B
Parameters
button. This opens the
Channel B Configuration
page.
11.
Click the
Save Changes
button. This saves the new configuration to the iRIM’s
non-volatile memory. The previous configuration is also preserved.
Содержание 025-9623 D3
Страница 1: ...Intelligent Radio Interface Module for Motorola iDEN i365 025 9623 D3...
Страница 18: ...Installation 18 025 9623 D3...
Страница 53: ...Tone Remote Interface 53...
Страница 55: ...Index 55 TX Voice Delay 46...