Zetor PROXIMA POWER Z90 2012, Руководство оператора

Страница: 83 / 222

82
DRIVING OPERATION
G232 G233 G234
STOPPING THE TRACTOR - PARKING
BRAKE
Under normal conditions stop the tractor
slowly. Shortly before stopping:
1. Depress the clutch pedal and brake
the tractor with the foot brake.
2. Shift the main gear shifting lever to
the neutral position.
3. After every stopping secure the tractor
against accidental movement with the
parking brake. Activation of the park-
ing brake is signalled by illumination
of the corresponding indicator on the
dashboard.
STOPPING THE ENGINE
After work of the tractor when the engine
was fully loaded, the engine must be left
to cool down.
1. Before stopping the engine reduce
the engine speed to 800 - 1000 rpm
and let the engine run without loading
for approx. 5 minutes.
2. Move the manual throttle lever to the
MIN position.
3. Pull up the control of the engine stop-
ping device and turn it; after stopping
of the engine operation push the con-
trol back.
4. After stopping of the engine you can
turn the key from the “I” to the “0” po-
sition (only with the engine at stand-
still - the charging indicator must be
lit).
LEAVING THE TRACTOR
Before leaving the tractor with the safety cab
do not forget to remove the key from the
switching box in the “0” position (in the “I” and
“II” positions the key cannot be removed).
The tractor must be secured against acci-
dental movement.
1. The engine must be “off”.
2. The tractor must be braked with the
parking brake.
The engagement of a gear does
not prevent the tractor from get-
ting in motion (the clutch is
disengaged)!
If the tractor is standing on a slope, its wheels
must be additionally
secured with wedges!
Lock the cabin.
Note: When the engine is stopped, the front
driving axle is automatically engaged.