Zetor PROXIMA PLUS 90 2012, Руководство оператора

Страница: 61 / 212

60
DRIVING
FH12N076
DIESEL PARTICLE FILTER REGENERATION
During the operation of a tractor, diesel particle filter is clogged by solid particles originating in engine run when burning fuel.
Clogged diesel particle filter automatically regenerates the temperature of exhaust fumes with higher load of the engine.
When operating the tractor with low load of the engine , e.g. with long-term operation on idle run, there is a partial clogging of die-
sel particle filter. This condition is signalized with the engine run by a lit red control of diesel particle filter, and followingly also by
acoustic signal and on the display of displaying unit of diesel particle filter by failure code
E:36
If this situation occurs, increase the load of engine and continue working until red control of diesel particle filter switches off and
acoustic signal does not stop.
By increasing the engine load, the temperature of exhaust fumes increases and the solid particles which clog diesel particle filter
burn.
Depending on the temperature of exhaust fumes and the degree of diesel particle filter clogging, regeneration can take up to thirty
minutes.
Increased load of engine shall be work with a tractor at higher engine revolutions with connected tools, power intake via
PTO shaft or outer hydraulic circuit.